Dabbsson DBS1000 Pro Portable Power Station - 1024Wh | 2000W

For single DBS1000 Pro unit, you can charge it with AC (1200W), solar panels (1200W Max), AC + solar panels(1200W Max) and car charger (126W).

DBS1000 Pro can be charged with solar panels that have MC4 connector at maximum 1200W and the combined voltage and current of the solar panels must be within 12-60 volts and under 25 amps.

In additional, DBS2000B expandable battery also has standalone solar charging capability with maximum 1200W input. The combined voltage and current of the solar panels must be between 12-60 volts and under 25 amps.

Yes, you can use most solar panels with MC4 connectors. Dabbsson uses a standard XT60 port for solar recharging. Ensure you use a sturdy MC4 to XT60 cable or use the solar charging cable that come with Dabbsson power station and make sure that the solar panels meet the specific requirements of the Dabbsson power station.

DBS1000 Pro can increase the output to 2400W by simply adding one expandable battery DBS2000B/DBS2100B.

Connect two DBS1000 Pro using the parallel connector for 3800W output.

Connect two DBS1000 Pro and two DBS2000B/DBS2100B for maximum 4600W output.

First you'll need to download Dabbsson App from the app store or Dabbsson official website. Then connect your phone to home Wi-Fi and turn on the bluetooth. After that, you can choose to search the nearby Dabbsson devices or add DBS1000 Pro manually according to the steps.

First, connect DBS1000 Pro to the app and ensure the network is working. Then, go to the firmware section in the power station settings within the app to check for updates and follow the steps to complete the process.

Using Semi-Solid LiFePO4 batteries, DBS1000 Pro has a 4000 + 500 (extra cycles with BMS) before the capacity drop to 80%+. (Tested in lab under 25℃ environment)

1. To make the most use of the battery life, we recommend using the portable power station in an environment of 20℃ to 30℃ and keep it away from water and heating source .

2. For long-term storage, discharge the battery to 30% and recharge it to 60% every three months.

3. For safety reasons, Dabbsson power station should be store in a dry environment and the temperature should be between 45℃ and -10℃.

When a power outage occurs, Dabbsson EPS automatically switches to battery power within 15ms to keep your appliance running.

Simply connect the Dabbsson power station to a wall outlet, then plug in the appliance you want to protect. Enable standby mode and set the power station's AC timeout to 'Never' in the Dabbsson App to ensure it's always on.

In this setup, the power station operates in pass-through mode, allowing grid power to flow through to the appliance. If the grid power fails, it seamlessly switches to battery power within 15ms to keep your protected appliances always on.

Yes, you can.

For battery lifespan consideration, discharge the power station normally to 30% and charge it back up in every 30 days.

Connect two DBS1000 Pro (1024Wh each) using the Dabbsson parallel connector and add four DBS2000B expandable batteries (2048Wh each) to get maximum 10240Wh capacity.

1. Connect the expandable battery cable while both the main unit and expandable battery are turned off. Insert the cable into the main unit first, followed by the battery.

2. If the expandable battery cable is connected while both the main unit and battery are powered on, a restart will be required.